UPA-USB Serial Programmer-S (UUSP-S)

- USB 2.0 and USB 3.0 compatible
- No power supply required
- In-circuit connector including 6 general purpose I/Os, overcurrent protected (40mA)
- 30 pins adapter connector
- Supports low voltage devices down to 1.2V
- Supports Motorola/Freescale HC12, HCS12, HCS12(X), HCS12(XE) families
- Supports Renesas/NEC RH850, RL78 families
- Supports Cypress/Fujitsu MB90, MB91, MB96 families
- Supports EEPROMs 24x, 25x, 93x, M35080, more...
- Can be used with TMS and BDM Lockout Disable adapters
- Small dimensions 5.5x11.5cm

CAN Bus Adapter for UUSP-S Programmer

- Based on MCP2515 controller
- Standard: ISO -11898
- Suitable for 12V and 24V systems
- Ports: 1 x CAN 2.0B
- Transfer rates: 10 kb/s - 1Mb/s
- Supported CAN IDs: 11-bit as well as 29-bit

78K0/HC912 Adapter for UUSP(S)

- Supports: BDM Locked 68HC912D60(A), 68HC912DG128(A), 68HC912DC128A
- Supports: uPD780824/6/8, uPD780973/4, uPD780948/9
- 78K0 MCUs can be programmed in circuit or by a test board plugged in the adapter
- Software: UPA-USB Device Programmer Software
- Hardware: UUSP (UPA-USB Serial Programmer)

TMS Adapter for UUSP(S)

- Supports: TMS370cx0x, TMS370cx5x, TMS375c006
- Supports: TMS370cx36, TMS370cx42 by additional adapter
- Software: UPA-USB Device Programmer (S) Software
- Hardware: UUSP(S) programmer

UPA-USB Device Programmer-S Software (UUPROGS)

Minimum System Requirements: Pentium processor-based personal computer, 1GB RAM Memory, 100GB HDD/SSD, USB 2/3 port,  Windows XP/7/8/10 32-bit or 64-bit
Supported Programmers: UPA-USB Serial Programmer-S (UUSP-S)
Hex Editor: Over write or insert mode; Support hexadecimal, decimal, octal and binary systems; File size up to 2GB (depends on the virtual memory of the computer); Print the whole file or selected part of it; Unlimited Undo/Redo; Adjustable bytes per line; Fast searching/replacing hex or text data; Compare files; Font and colour options; Opening/Saving Intel Hex Format files; Opening Motorola S Record files; Swap even and odd bytes; Copy dump to clipboard; Copy part of a file to another file or to a text editor; Go to specified offset; Fill a selected part of the file in 0, FFh, counter or random ;
Checksum Calculator: 8/16/32/64 bit, CRC16, CRC32, CRC64, Adler32, MD4, MD5, RIPEMD160, SHA1, SHA256, SHA512
Picture View: PDF, JPG, BMP, PNG, GIF and TIF files; Zoom In/Out
Text Editor: TXT, RTF
Hex/DEC Converter
Pulse Generator: 0-500kHz
Voltmeter: 0-5.5V
Pascal Script Editor: The user can add new devices and actions using pascal scripts

Latest Software Release: V3.1.2.0/02-Feb-2024 Changelog

Demo Version
Download  UPA-USB Device Programmer Software Demo v1.1.0.0  -  4.4MB

UUPROG-S Software
UUPROG-S Software
UUPROG-S Software
UUPROG-S Software
UUPROG-S Software
UUPROG-S Software
UUPROG-S Software
UUPROG-S Software