UPA-USB Device Programmer-S (UUSP-S)

- USB 2.0 and USB 3.0 compatible
- No power supply required
- In-circuit connector including 6 general purpose I/Os, overcurrent protected (40mA)
- 30 pins adapter connector
- Supports low voltage devices down to 1.2V
- Supports Motorola/Freescale HC12, HCS12, HCS12(X), HCS12(XE) families
- Supports Renesas/NEC RH850, RL78 families
- Supports Cypress/Fujitsu MB90, MB91, MB96 families
- Supports EEPROMs 24x, 25x, 93x, M35080, more...
- Can be used with TMS and BDM Lockout Disable adapters
- Small dimensions 5.5x11.5cm
Buy Now

UPA-USB CAN Bus Analyzer (UUCAN)

Standard: ISO -11898
-Suitable for 12V and 24V systems
-Ports: 1 x CAN 2.0B
-Transfer rates: 10 kb/s - 1Mb/s
-Supported CAN IDs: 11-bit as well as 29-bit
-Connection to PC: USB 2.0 High Speed port (required)
-Power via USB cable
-Tracing CAN bus data traffic
-Sending of predefined messages
-Sending of logged messages
-Six 29-bit filters
-Two 29-bit masks
-Software filters
-Normal and Listen-only modes
-Build in waveform analyzer with CAN bus protocol decoder
-Scripting support
-Script IDE
Buy Now

UPA-USB Logic Analyzer (UULA)

- Digital channels: 8 or 16
- Sample rates : 0.2Msps to 30Msps
- Number of samples: > 2.000.000
- Sampling modes: transitional and conventional
- Trigger: rising edge, falling edge, high, low
- I2C, SPI, Microwire, Synchronous and Asynchronous Serial protocol decoders
- State List display
- Unlimited number of signals, cursors and comments
- Grouping Signals into a Bus
- Edit waveform mode: undo/redo; copy/paste/cut clipboard ...
- Easy zoom using mouse wheel
- Connection to PC: USB 2.0 High Speed port (required)
- Power via USB cable
* Maximum Sample Rate depends on your PC speed
Buy Now

High Speed USB Module
High-Speed USB Module

- based on the Cypress CY7C68013A microcontroller
- USB 2.0 and 1.1 Compatible
- High-Speed (480Mbps) and Full-Speed (12Mbps)
- Four programmable bulk, interrupt or isochronous, endpoints, Integrated FIFOs
- Buffering options: double, triple or quad
- Enhanced 8051 Microprocessor
- 8/16KB internal RAM for code and data
- Software downloaded via USB or loaded from 16KB EEPROM
- 24 general purpose I/Os; I2C master bus
- Direct connection to most parallel 8/16 bits, interfaces, data transfer rates up to 40MBps
- Dimensions 60x35mm (2.4x1.4 inch)
- Application: High-Speed PC interfacing, USB 2.0 development
Buy Now